Please select product type required from the options below.
| Power Assemblies | Clamps | Heatsinks | Technical Enquiry Form |
| Air Cooled | Water Cooled |
Water cooled heatsinks are designed for use in high current, high power
assemblies such as single, three or six phase bridges or A.C.
controllers. They are also compatible with the Dynex range of clamps.
Complete bridges of up to six devices may be constructed with two
heatsinks for double side cooling.
| Part Number | Description | Outline |
|---|---|---|
| D | Water cooled heatsink with 'U' internal waterway for thyristor and diode devices up to 50mm in diameter.. |  |
| E | Water cooled heatsink with 'U' internal waterway for thyristor and diode disc devices up to 75mm in diameter. |  |
| F | Water cooled heatsink with 'U' internal waterway for 87mm to 100mm and smaller diameter thyristor and diode disc devices. |  |
| K | Water cooled heatsink with 'U' internal waterway for thyristor and diode disc devices up to 50mm in diameter. |  |
| L | Water cooled heatsink with 'square' internal waterway for 67mm to 77mm and smaller diameter gto, thyristor and diode disc devices. |  |
| M | Water cooled heatsink with 'square' internal waterway for 87mm to 100mm and smaller diameter gto, thyristor and diode disc devices. |  |
| P | Water cooled heatsink with 'square' internal waterway for thyristor and diode disc devices up to 50mm in diameter. |  |
| Y | Water cooled heatsink with 'U' internal waterway for thyristor and diode disc devices up to 50mm in diameter. |  |
Note: Details of connections, flow rate/thermal resistance are
given in the datasheets. If you require further assistance please e-mail
us at power_solutions@dynexsemi.com or Tel: +44 (0)1522 502901 / 502753
or Fax: +44 (0)1522 500020.
| Copyright © 2008 Dynex Semiconductor Copyright © 1995-2008 I-Next Ltd |
We welcome your comments about this service, please send them to: power_solutions@dynexsemi.com |