Phase Control Thyristors (SCR) - 1800V

We have grouped our Phase Control Thyristors (SCRs) by voltage grade. The thyristor (SCR) voltages shown below represent the maximum for each group. Each table shows the voltage range for each thyristor (SCR) type in ascending current order. To view other thyristors (SCRs) click on the required maximum voltage shown below.

1400V

1800V

2800V

3800V

4800V

5200V

6500V

Phase Control Thyristors (SCR) - Disc / Puk Devices

Part Number	Maximum VDRM/VRRM (V)	Maximum IDRM/IRRM (mA)	IT(AV) at Tc=60°C (A)	ITSM at TvjVR=0 (kA)	I²t at TvjVR=0 (MA²s)	dV/dt (V/µs)	Non-rep dI/dt (A/µs)	Rth(j-c) dsc (°C/W)	Outline Type Code	Flange OD / Contact OD / Height (mm)
DCR720E	1800	30	724	9.8	0.480	1000	700	0.041	E	42 / 25 / 15

DCR803SG	1800	50	1045	14	0.975	1000	1000	0.032	G	58.5 / 34 / 27

DCR1003SF	1800	100	1511	26.25	3.440	1000	1000	0.022	F	76 / 48 / 27

DCR1374SBA	1800	150	2694	50	12.500	1000	1000	0.013	L	99 / 63 / 35

DCR1474SV	1800	250	3600	61.2	18.750	1000	300	0.0095	V	112.5 / 73 / 27

DCR1474SY	1800	250	3600	61.2	18.750	1000	300	0.0095	Y	112.5 / 73 / 37.3

DCR5980A18	1800	500	5985	98	48	1000	250	0.0065	A	148 / 100 / 35

DCR6990M18	1800	500	6987	98	48	1000	250	0.005	M	148 / 100 / 26

Note:

1. Tvj = 125°C.
2. Rth(j-c) figure given for double side cooled, dc.


Copyright © 2010 Dynex Semiconductor Copyright © 1995-2010 I-Next Ltd	We welcome your comments about this service, please send them to: power_solutions@dynexsemi.com