i2 Phase Control SCRs (Thyristors) - 2200V

We have grouped our i2 Phase Control SCRs (Thyristors) by voltage grade. The SCR (thyristor) voltages shown below represent the maximum for each group. Each table shows the voltage range for each SCR (thyristor) type in ascending current order. To view other SCRs (thyristors) click on the required maximum voltage shown below.

2200V

2800V

4200V

5200V

6500V

8500V

i2 Phase Control SCRs (Thyristor) - Disc / Puk Devices

Part Number	VRRM/VDRM (V)	IT(AV) at Tc=60°C (A)	ITSM at TvjVR=0 (kA)	I²t at TvjVR=0 (MA²s)	dV/dt (V/µs)	Non-rep dI/dt (A/µs)	Rth(j-c) dsc (°C/W)	Outline Type Code	Flange OD / Contact OD / Height (mm)
DCR1080G22	1800 - 2200	1083	14.4	1.040	1500	500	0.0268	G	58.5 / 34 / 26.2

DCR1770F22	1800 - 2200	1770	23.8	2.83	1500	1000	0.0184	F	73 / 47 / 27

DCR2690L22	1800 - 2200	2690	38	7.220	1500	300	0.0117	L	98.9 / 62.85 / 35.1

DCR2860C22	1800 - 2200	2855	38	7.220	1500	400	0.0101	C	98.9 / 62.9 / 26.9

DCR3910Y22	1800 - 2200	3910	54	14.580	1500	300	0.00835	Y	112.5 / 73 / 35

DCR4060V22	1800 - 2200	4060	54	14.580	1500	300	0.00746	V	112.5 / 73 / 27

DCR5050B22	1800 - 2200	5049	72.5	26.300	2000	500	0.007	B	120 / 84.6 / 35.5

DCR5450W22	1800 - 2200	5240	72.5	26.300	2000	500	0.00631	W	120 / 84.6 / 27.7

Note:
1. Rth(j-c) figure given for double side cooled, dc.


Copyright © 2010 Dynex Semiconductor Copyright © 1995-2010 I-Next Ltd	We welcome your comments about this service, please send them to: power_solutions@dynexsemi.com